Página no encontrada

Speedway Motors T-Bird Power Steering Rack & Pinion for Mustang II Crossmembers

$264.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store speedway_motors
(294115) 99.5%,

Location: Lincoln, Nebraska
Ships to: US,
Item: 261957632838

Return shipping will be paid by:Seller
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Return policy details:
Speedway Motors:Speedway Motors
Type:Rack & Pinion Assemblies
Manufacturer Part Number:91035341
Item Length:47.00
California Prop 65 Warning:True

High-Quality Design: The T-Bird Power Steering Rack & Pinion is an all-new assembly using premium internals and seals, offering a durable and efficient upgrade for your Mustang II IFS. This is not a remanufactured unit, ensuring superior build quality., Adaptable Fit: This power steering rack is a direct bolt-on swap for most aftermarket Mustang II crossmembers. It can also be retrofitted to 16-inch center-to-center Mustang II crossmembers using offset rack bushings, making it a versatile choice for many vehicles., Enhanced Steering Control: The 15:1 performance steering ratio with 2-1/2-turns lock-to-lock and the use of standard 3/4″-36 spline input shaft U-joint provide better low-speed control, especially when fitted with larger tires., Inclusive Package: The product includes AN -6 adap New T-Bird Power Steering Rack & Pinion for Mustang II Crossmembers Sku # 91035341 Mfr. Part # 91035341 Condition New Brand Speedway Motors Sold Each Details Info All-new using premium internals/seals, this is NOT a remanufactured assembly 15-1/2-inch center-to-center mounting works with aftermarket crossmembers Can be retrofitted to 16-inch center-to-center Mustang II crossmembers using offset rack bushings Includes inner tie rods with SAE 9/16-18 threads installed with jam nuts Includes steering rack mounting bushings for easy installation 9/16-18 and 5/8-18 threads O-ring pressure and return ports Adapters to convert OE ports for use with AN -6 fittings and hose included 15:1 performance steering ratio with 2-1/2-turns lock-to-lock Pinion shaft uses industry standard ¾-inch-36 spline U-joints Upgrade Your Mustang II IFS with Power Rack-and-Pinion Steering There is little argument that the Mustang II independent front suspension (IFS) is one of, if not THE most widely used suspension designs for street rods, kit cars, and even updated classic muscle car suspensions. From weld-in frame stubs to full frame conversions, the Mustang II IFS offers a whole lot for your performance dollar. In one upgrade you give your project disc brakes, rack-and-pinion steering, better suspension geometry, and the ability to modify and update with all manner of aftermarket parts including drop spindles, coilover shocks, and more. Many Mustang II setups begin as budget systems with standard stamped steel control arms, small disc brakes, and manual steering. It is a great starting point and keeps the initial buy in at an enticing level for the average enthusiast, leaving plenty of room to upgrade down the road as budget allows. One extremely popular update is adding a power rack-and-pinion unit in place of the original manual Mustang II rack-and-pinion that shipped with the IFS kit. Adding power steering provides better low-speed control, especially with larger tires, and allows a smaller diameter steering wheel to be fitted, often providing much sought-after interior room in the small cabins of street rods. Our 1982-1988 Thunderbird rack-and-pinion conversion power steering rack is the perfect upgrade for when you are ready to enjoy the benefits of power steering or as an upgrade to the parts-store reman power rack provided with your Mustang II kit originally. Superior Build Quality with Direct Fit Ease Have you tried to source an original or remanufactured ’74-’78 Mustang II power steering rack lately? They are getting harder to find and costs keep going up. However, a rodding trick that has grown in popularity is to upgrade to the Fox chassis Thunderbird rack-and-pinion due to its lower cost and ease of conversion. For most aftermarket Mustang II crossmembers it is a direct bolt-on swap thanks to the slotted mounting hole found on these newer crossmember designs. For those with older Mustang II crossmembers you can still fit the T-Bird rack by simply using offset rack bushings to change the center-to-center mounting bolt location to the wider 16-inch dimension used on the original Mustang II. Our T-Bird rack is not a remanufactured unit. It is built from an all-new casting and fitted with all new internals. That includes the rack gear, pinion shaft, internal seals, inner tie rods, and fluid lines. New mounting bushings are included and if your mounting hardware has seen better days we do offer a new . Some installations may require to properly space the rack away from the crossmember for clearance. We offer these spacers along with the required for everything to mount up properly. We provide AN -6 hose adapters for the rack’s inlet and outlet ports due to the Thunderbird rack-and-pinion fittings differing from the original Mustang II rack-and-pinion fittings. This reduces frustration and installation time by allowing to be produced on site if your project is not already using AN power steering lines. The smaller 9/16-18 port is the «in»from your pump, while the larger 5/8-18 port is the return to your pump’s reservoir. The T-Bird-based rack uses a 3/4-36 spline input shaft (manual is 9/16-26), requiring little more than a change at the rack end of your steering shaft in most installations. If you are replacing an older power rack, then there should be no change to your steering shaft configuration. The Perfect Solution for Most Any Mustang II Configuration A readily available power steering rack constructed from all new components and at a great value, what is not to love? Installation is a direct replacement for your manual rack in most instances due to the same Mustang II rack-and-pinion dimensions, and our T-Bird-based power steering rack will work with most any used in a modern serpentine belt drive or V-belt setup, including the Ford CII, GM Type II, and GM Type I (more commonly known as a Saginaw pump). These pumps output the necessary 1,200 psi required and flow approximately 3 GPM. We offer a multitude of in both V-belt and serpentine for Ford, GM, and Chrysler engine families to add the pump of your choice to your engine. Since there are so many variables that affect a properly functioning power steering system, including vehicle weight, alignment, steering wheel diameter, tire width, steering ratio, and much more, some applications may feel twitchy and may require a reduction in flow. The GM Type 1 and Type II pumps utilize that can easily be swapped out to adjust the flow down to aid in steering twitchiness and prevent steering dart due to an over-boosted power steering system. Another option is an where you can dial in the exact steering effort you wish easily. This means you can have the system turned down for more effort when needed for a track day, but then it is easily turned back up to reduce your steering effort for daily driving. This is your best solution when using the Ford CII pump in a Ford-powered application as well. Installation Tips Use bolt kit to bolt rack directly to the crossmember Use bolt kit with rack spacers if extra crossmember clearance is needed converting from a manual rack Offset mount bushings will be required if the crossmember only has 16-inch center to center mounting bracket holes Overall width of steering rack with inner tie rods is 45-1/8-inches Compatible with standard Mustang II outer tie-rod ends, such as Bump steer kit can be used in lieu of outer tie rods if desired If rack extensions are necessary for your installation this power rack requires 15/16-20 thread extensions The power steering rack has 5/8-inch and 9/16-inch O-ring style ports which will not work with inverted flare fitting-equipped power steering lines OEM direct replacement for 1982-1993 Ford Mustang, 1982-1988 Ford Thunderbird, and 1984-1988 Mercury Cougar but will require aftermarket AN pressure and return line kit to connect to your factory pump Intended for front of crossmember mounting applications only, will not work on rear mounted applications Specs Material Type Steel Sold in Quantity Each Finish Natural Spline Count 36 Rack Type Power Thread Pitch 9/16-18 Turns Lock to Lock 2.50 Thread Pitch (2) 5/8-18 Mounting Bracket Included No Overall Height 10.00 Overall Length 45.125 Tube O.D. 2.20 Spline OD .75 Travel 5.87 Outer Tie Rod Ends Included No Bushing Included Yes MFG. Part # 91035341 Spline End 3/4»-36 Center to Center 15.5 Inner Tie Rod Ends Included Yes Power Steering Pump Included No Notes Includes (2) 91034341 rubber bushings Reviews I would buy this again Rated by Dave on October 06, 2021 Summary: It was easy to return and get a new part fantastic Yes, I recommend this product. good price good quality Rated by hamer on October 02, 2021 Summary: look good Yes, I recommend this product. great product Rated by Hawtrod on September 16, 2021 Summary: I installed on my 46 ford it made a huge difference in handling, the one i had before did not compare. thanks for quick shipping and great price. Yes, I recommend this product. I have recommended this to another guy Rated by 63 longroof on September 10, 2021 Summary: I have this in a 63 nova station wagon Yes, I recommend this product. thanks Rated by Dave on August 25, 2021 Summary: works great Yes, I recommend this product. Related Items / Suggested Parts Mustang II Rack & Pinion Bolt Kit – For Use With Rack Spacers T-Bird Power Rack & Pinion Fittings, 9/16-18, 5/8-18 To AN6 Oring Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump Speedway Mustang II/T-Bird 2 Inner Tie Rod Extension, Power Version Mustang II Outer Tie Rod End, Manual Version Tech Support We’re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 71 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Frequently Asked Questions About Speedway Motors T-Bird Power Steering Rack & Pinion for Mustang II Crossmembers in My Website

www.bioindalamb.com is the best online shopping platform where you can buy Speedway Motors T-Bird Power Steering Rack & Pinion for Mustang II Crossmembers from renowned brand(s). www.bioindalamb.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Speedway Motors T-Bird Power Steering Rack & Pinion for Mustang II Crossmembers on www.bioindalamb.com?