Página no encontrada

South Bend 9/10K lathe carriage dial indicator Holder plus Cross Slide Holder!

$54.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store kevin1954.2012
(1205) 100.0%,

Location: Cross Plains, Tennessee, United States
Ships to: US,
Item: 125140190171

Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller’s listing for full details. See all condition definitionsopens in a new window or tab
Machine Type:Metal Lathe
Treated Material:Plastic
Swing Over Bed:11 in
Kd3dPrinting:Kd3dPrinting
Control:Automatic, CNC, Manual, Semi-Automatic

eBay Combination Sale! (2 items included) Lathe Sculpted Dial Indicator Holder with Automatic Internal Probe Retention Clasp! Plus++++ South Bend Lathe 9 or 10K, Cross Slide Dial Indicator Holder (3d Printed) *******The Carriage Dial Indicator Holder********* Fits these lathes: South Bend 9 (A,B,C) South Bend 10k 3d Printed sculpted dial indicator recess with automatic internal retention clasp! Cross Slide Holder with magnetic stop block! DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!! DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!! DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!! These are 3dprinted «indicator stops» which I developed and tested on my South Bend 10K lathe. This is a high quality 3dPLASTIC part which is BETTER AS PLASTIC than metal stops because it does the job and WILL NOT DAMAGE YOUR LATHE WAYS! It cannot scratch the way and IF accidentally OVERRAN it will simply slide on the way WITHOUT DAMAGE! Automatic Indicator Probe Retention Clasp: This stop uses a «tension adjustable» internal clasp to allow the user to SET ONE TIME the desired tension on the internal Clasp. Then the Dial Indicator Probe can be installed and removed «Without ANY adjustment or fiddling with a retaining screw»! VERY HANDY! ********************************************************************************** *******The Cross Slide Dial Indicator Holder Stop******** This dial indicator mounting bracket and magnetic block, allows mounting of a DIAL INDICATOR (NOT INCLUDE) to the back side of the lathe saddle. On the South Bend 10K lathe, one of the tapper attachment mounting holes is used. On the SB 9″ the tapper attachment PAD exists but will have to be drilled and tapped to accept a mounting bolt. 1/4 – 20 up to 3/8 – 16 size ok. NOTE: This mount DOES WORK with the «Taper Attachment Cross Slide» but NOT when the complete «Taper Attachment» is mounted. A magnetic probe block allows EASY adjusting of the indicator probe home location by simply sliding the block. If an OVER run (movement in) of the saddle reaches the end of the probe travel, the sliding magnetic block simply slides preventing any damage. IMPORTANT: Dial indicator must be a «Flat Back» indicator to provide clearance for the cross slide. I just cut the «lug» off the back of one of my cheap «Chinese» indicators. Easy to do. NOTE: Mounting requires use of EXISTING hole on carriage of SB 10K lathes OR…. SB 9″ lathes (or lathes WITHOUT hole) require drill and tapping of mounting hole in lathe saddle. 1/4 – 20 up to 3/8 – 16 size ok. *********************************************************************************** More Information Follows The below video is a demonstration showing the use of a simple carriage stop with a dial indicator (The holder in the video had the EXTERNAL probe retention screw). This allows setting so that as the carriage reaches a particular location, the operator can witness the position using the dial indicator and disengage or stop the carriage. It is best to set a position of the stop so that when the carriage reaches the dial indicator probe, the advancement to final position is approximately 1 dial turn or less. This makes it easy to «know» when you are about to see the correct «0» point to stop the carriage feeding. It was very easy to stop within 0.005 – 0.010″ of a position. This allows you to «manually» advance the carriage to finish the cut if desired. This indicator works very good. I made this to help me turn a backing plate for a new chuck. It was fantastic and easy to repeat many cuts and STOP within a few thousands of an inch from a preset location. This is great for internal boring and thread cutting or any other time you need a PRECISE advance of the lathe carriage. NOTE: This does NOT automatically stop your carriage. The operator MUST manually stop or disengage the carriage feed when desires. The «dial indicator» (NOT SUPPLIED) provides a precise position for carriage stop. DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!! Video click below image! Video is of another model of stop offered in another listing I have. You will be purchasing the Dial Indicator Stop Holder pictured in «THIS LISTING»! NOT THIS VIDEO! (does not have dial indicator retaining screw installed) South Bend 9/10K lathe carriage stop Indicator – YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo]

Frequently Asked Questions About South Bend 9/10K lathe carriage dial indicator Holder plus Cross Slide Holder! in My Website

www.bioindalamb.com is the best online shopping platform where you can buy South Bend 9/10K lathe carriage dial indicator Holder plus Cross Slide Holder! from renowned brand(s). www.bioindalamb.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling South Bend 9/10K lathe carriage dial indicator Holder plus Cross Slide Holder! on www.bioindalamb.com?