Página no encontrada

ACCEL 5000 SPARK PLUG WIRES SBC 350 383 400 406 FOR HEI & POINT 5041-K CLEARANCE

$29.5 Buy It Now or Best Offer
free,30-Day Returns

Seller Store skipwhite
(211374) 99.8%,

Location: Kingsport, Tennessee
Ships to: US,
Item: 353980274298

Restocking Fee:20%
Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Color:BLACK
Interchange Part Number:5000 SERIES
Finish:HIGH TEMP SILICONE
Manufacturer Part Number:5041-K
Other Part Number:5041K
Accel:Accel

These wires normally sell for $59.48. Our clearance price is nearly half that price. We will do our best to point out any thing note worthy of these items. Go to our eBay store to see many hundreds of such items. There are many reasons as to why these items are being closed out. Listed below are some of the many possibilities. Most all these items are in perfectly new condition. No gimmicks. We are in a rush to get our second machine shop up and going.Old/New Stock Returned from customers that choose the item wrongly. Left over stock of an item that was discontinued in the past.A few have become slow sellers for us, as our business has shifted into high value items such as engines, rotating assem. and cyl heads.We have purchased some items in bulk that were discontinued and have many of these items still in stock. We’re trying to clear our space for our new engine room and we’re in a rush to do so. Acquire funds to build our second new machine shop for building engines. ACCEL 5000 SERIES SUPER STOCK 8mm HIGH TEMP WIRESUNIVERSAL FOR CUSTOM FIT WITH 90 DEGREE BOOTS, FITS MOST V-8 AND V-6 ENGINES. FITS HEI STYLE CAP OR POINT STYLE. BRAND NEW/OLD STOCK. These wires will work with most any V-6, V-8 or I-6 engine that uses the 90 degree boots on the spark plugs. Some engines that do not use the 90 degree boots may still be able to use these. Check for exhaust or header clearance if you are not sure. Most all SBC Chevy V-8’s can use the 90 degree boots without any clearance problems. Universal wires are the only way to go for that perfect fit look. The Accel 5000 Series wires are a much better grade than their 3000 and 4000 series. These wires have an excellent heat resistance rating, rated at 550 degrees vs. 450 for the Accel 4000 series. This higher temp resistance is very desirable considering the high levels of heat most plug wires encounter. The heat destroys wires prematurely and allows voltage loss. These wires also have a much higher level of conductivity compared to the 3000 and 4000 series. Compare the ohm ratings on all the Accel wires and you will see there is a great difference between the 3000, 4000 and 5000 series. We consider these wires to be an excellent grade of wire for use on any street rod or stock vehicle. We use these wires on our turn key engine packages. Dyno results show no difference in performance from higher grade wires. These wires are universal to allow for custom fit. They will fit male style or female style distributor caps. The male and female terminals are included. The spark plug boots are at a 90 degree angle. We also offer these wires in blue, and with straight boot ends. See our other listings. The Accel SuperStock Spiral Core Spark Plug Wire Set with only 500 ohms/foot of resistance, more ignition energy can reach the spark plug, producing a hotter, longer lasting spark flame kernel. The result is higher performance through improved efficiency, quicker throttle response and reduced emissions. This 8mm wire is a double silicone construction and rated to 550 degrees Fahrenheit. The high gloss black silicone wire jacket resists heat extremes, petrochemicals, ozone and has moisture for greater durability and longer life. The high-density, high-temperature and high-durometer silicone insulation provides greater dielectric strength. The fiberglass braid adds greater pull strength and terminal retention. The stainless steel spark plug terminals provide excellent long life, electrical conductivity and corrosion resistance. They are used with pre, post High Energy Ignition applications and are custom/universal fit. Not assembled Universal for custom fit. Diameter (mm) 8.00mm RFI Suppression Yes Wire Color Black Distributor Terminal Ends Male or Female HEI Distributor Boot Color Black Distributor Boot Material High Temp Silicone Spark Plug Boot Ends 16 90 degree ends for use with HEI or Point distributors. Spark Plug Boot Color Black Spark Plug Boot Material High Temp Silicone Coil Wire Included Yes Conductor Style Spiral core Quantity Sold as a set The items in our clearance special will be selling at well below cost prices. These items have accumulated in our former warehouse that we’re converting to our new additional machine shop for building engines. In the past, we would sell these items at local swap meets and other various selling venues. Due to time constraints, these items have to go. The Accel wires would be classified as old/new stock. They are in perfect condition.We are selling the wires at nearly half the regular price. We have used these wires on many of our engines over the years without any problems, and still use them on certain applications.Important Note:The 8.0mm 5000 Series wires are considered a medium to high end set of wires. As you may know, plug wires come in many different quality grades. The 5000 Series is just below the top of the line offered by Accel. They have four levels of plug wires, so one under the top grade is a very decent cable. Each grade up has a lower resistance rating and a higher temp rating. The ohm and temp. ratings of a plug wire are very important. Good quality wires are very important for proper ignition. Beware of some of the 9.5-10mm low grade wires on the market. These knock-off wires have been found to be inferior in many different ways. They are composed of nothing more than a thick low grade rubber cable. The inside core structure is unlike any wire on the market. We have first hand knowledge of the quality of these wires, as they were sent to us for evaluation. We hoped that they would be a decent low cost product to offer our customers. Upon close observation, these wires were the worst we had ever seen. The copper spiral windings were micro-thin, and upon testing the ohm rating, the resistance was very high. In fact, the ohm rating was worse then any wire we have ever reviewed. The conductivity was very poor. The many layers of protective jacketing used on most high quality wires was missing. The outer rubber jacket was made from a gummy soft rubber that has no resistance to heat. The center core in the wire was a fraction of the size of any name brand wire on the market. So, don’t be fooled by these low cost wires with a large mm diameter. The benefits of using a high end set of wires are many. Low quality wires will cause your engine not to perform the way it should, and they will degrade in conductivity at a very fast rate compared to name brand quality wires. We have seen several sellers offering these low-grade wires in various colors. The tell tale in spotting these wires will be an unknown or unfamiliar name, an unusually low cost, large diameter cable size (9.5-10mm), and no spec ratings on the wire.Very Important Note! Our sales staff has limited technical knowledge on this product and are usually unable to answer many of the questions asked. See our other listings for variations of this product. We are not responsible for collateral damage caused by the use of this product. RETURN POLICY Should a problem occur, please contact us. If a return is necessary, please contact us for an RGA number and return authorization. The RGA number must be included on the return label. If an item is returned without an RGA number, it will not be processed. A full description of what the problem is needs to be included with any returned product with your contact info, and proof of purchase. Even though you may have explained the problem to us, and been granted permission to return the product, we must have a written explanation and a contact number included with the product. It is also recommended that you include the name of the person from our company that you have been in contact with. You must send the item back to us in a trackable manner (USPS Priority Mail, FedEx, etc.) and keep the tracking info of the returned product. Please give ample time for returns to be processed. Following these guidelines will make the return process work as it should. PAYMENT AND SHIPPING DETAILS. We offer great discounts on shipping. You only pay the full shipping fee on the highest shipping cost of your items, and HALF PRICE shipping on all additional items. Few offer discounts on shipping such as this. Our checkout system will automatically calculate your shipping discount at the time of final payment, providing you consolidate your payment. You may receive a verification and tracking number shortly after purchase, but this does not necessarily mean that your product has shipped. It would be fair to say that 98% of products will be going out the day the shipping label is issued. On occasion, the product may not ship out until the next day after the label has been issued. Most products purchased late in the day will not be shipped until the next day. If you checkout and start over, the auto calculator will not recognize the multiple purchases, and there will be no shipping discount. FedEx is our primary shipper. We are unable to ship to APO/FPO addresses. Help us ship your order promptly by including your physical address at checkout. If your order MUST be shipped to a PO BOX, please contact us. Additional charges may apply. Below is a map representing the estimated delivery time to get to you from our location. Delivery times may vary, especially during peak periods.FedEx Home Delivery delivers Tuesday – Saturday. If a package leaves here on a Thursday, and you are in a 2 day delivery zone, your package may deliver to you on Saturday. If you are in a 3 day zone, and your package leaves on a Thursday, you should receive it on the following Tuesday. Expedited shipping is available upon request for an additional fee. Please contact us for rates. The estimated shipping time is usually as the map shows, but many factors can delay this. Hawaii and Alaska have a 6+ day estimated delivery time.The shipping quoted in this ad is only for the 48 continental United States. If shipping to anywhere else, please contact us. The half price shipping on all additional items also only applies to items that are being shipped in the 48 continental United States.

Frequently Asked Questions About ACCEL 5000 SPARK PLUG WIRES SBC 350 383 400 406 FOR HEI & POINT 5041-K CLEARANCE in My Website

www.bioindalamb.com is the best online shopping platform where you can buy ACCEL 5000 SPARK PLUG WIRES SBC 350 383 400 406 FOR HEI & POINT 5041-K CLEARANCE from renowned brand(s). www.bioindalamb.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling ACCEL 5000 SPARK PLUG WIRES SBC 350 383 400 406 FOR HEI & POINT 5041-K CLEARANCE on www.bioindalamb.com?