Página no encontrada

Seal & Triac service kit for Breville Dual Boiler Coffee Machines BES900 BES920

$33.86 Buy It Now or Best Offer
free,30-Day Returns

Seller Store cockabrew
(528) 100.0%,

Location: Sydney
Ships to: US,
Item: 235634803968

Returns Accepted:ReturnsNotAccepted
Cockabrew:Cockabrew
Compatible Brand:Breville
Type:O-Ring
BES900 BES920 BES980 BES990:BES900 BES920 BES980 BES990
Compatible Model:BES900 BES920 BES980 BES990
Suitable For:Cappuccino Machine,Espresso Machine,Espresso Maker

This is an EVEN beefier, upgraded version of our other service kits for Breville Dual Boiler machines – BES900 & BES920. It includes a group seal, food grade silicone grease as well as other seals. This will also cover the older BES980 Oracle (not touch screen), though there may be some seals left over. In this set, we’ve included solutions to the main hot-side culprits of leaks in these machines. This is a great kit for preventative maintenance and servicing that includes everything you need to take care of all the most common seal leak issues, as well as overheating issues caused by faulty triacs and/or optocouplers on your triac board, at a great price! This kit is perfect for machines that don’t have a dead steam boiler or the dreaded 3 beeps of death. We will have a kit for that soon though! This kit includes: Boiler O-ring set: 5 x large O-rings for the coffee and steam probes and 12 x small O-rings for the boiler hose connections and NTCs (this also covers the O-rings at the back of the group head beneath the solenoid). 3 x clear O-rings for the steam boiler probe shafts. Note: To install these, you’ll need to remove the probe, carefully remove the E-clip at the top, slide the white sheath up and remove the old seal before carefully sliding the new Oring up from the bottom of the probe and into place. You’ll may need to nudge the O-ring all around underneath the white sheath with something blunt. Once it’s under there, you can slide the sheath back down, hold it in place and replace the E-clip to lock it all into place. Drain valve O-rings: 2 x small O-rings for the tips of the drain valves that seal the openings. These are where the leaks usually come from. I have never seen the larger O-ring on these valves die…yet (the green one in the pic) so I haven’t included those 4 x large O-rings for the boiler drain fittings and connections to the drain valves (for BES920 & BES980). Solenoid seal set: 2 x PTFE solenoid gaskets 2 x brass vent pinsRefer to the last photo in this listing for fitting instructions. Steam valve seal set: 2 x PTFE internal ball valve seals. Note: After installation the lever will feel tough. Don’t worry, this is normal. It will soften nicely after you use it and the seals form around the ball valve. 3 x small O-rings for the connecting elbow and steam arm seals 1 x HNBR O-ring for the valve actuator Steam boiler anti-vac seals: The anti-vac valve on the steam boiler is very often overlooked and we’ve seen MANY of these machines with leaks here. The seal around the plunger goes brittle over time and this allows pressure to vent from your steam boiler, which makes it have to kick the element on again to top it up more frequently. If the leak gets bad enough, it can lead to much more scale build-up in your steam boiler due to it heating more often than it should. More scale = more chance of compromising the boiler element which = a boiler replacement which is very expensive! If you already have the machine open, you might as well use an 18mm spanner/socket to remove the anti-vac, give it a quick bath in descale solution and replace the seals. 1 x silicone seal for the anti-vac plunger 1 x silicone seal for the anti-vac housing nutULKA EP5 & EX5 pump seal kit: If your machine is up to 6yrs old and you’ve noticed a drop in brew pressure or a stall in the pre-infusion phase, this kit should help. It should also help to quiet down the pump as they do get louder as the seals age. If your machine is older than 6yrs however, we highly recommend that you install a new pump. We’ve found from plenty of experience that the coils that drive the piston in these pumps tend to fail over time as like most things, they have a working lifespan. The pump gets warmer the longer it’s used and as you could imagine, after that many years of heating up & cooling down, the coils inside will inevitably weaken. A seal kit may help, but it’s usually just a band-aid solution at that point.1 x Delrin ball (one-way valve)1 x EPDM piston seal3 x NBR outer seals Slayer Mod kit: The «Slayer Mod» on Breville coffee machines is a mod that sacrifices the hot water tap to allow for some flow control and shot profiling. The name comes from the Slayer coffee machines developed in Seattle, USA, that allow for flow/pressure profiling. Aside from re-routing some of the hydraulics, the water tap needs to be blocked off in order for this mod to work. This kit will cover what you need for this mod and a little more, because we want you to have fun! If you’re more into espresso and milk coffees, then this mod may be for you and you’ll need these seals. If you prefer black coffees like long blacks that need hot water, then this mod may not be for you unless you’re happy to use a kettle for the hot water component. Kit includes: 2 x custom cut silicone hot water tap seals 2 x HNBR water valve seals8 x Silicone hydraulic hose seals Triac board kit: Our kit includes everything you need to replace the failed parts, and then some. The electronic components we use are manufactured by very reputable companies and have excellent longevity and performance: · 2 x Q6015L5 triacs by Littlefuse (for the steam and coffee boilers) · 1 x BTA06T triac by STMicroelectrics (for the portafilter warmer) · 3 x MOC3063 Optocouplers by Liteon · 1 x GD100 0.5g sachet of thermal paste · 1 x 30cm length of custom solder – This solder is custom manufactured to the specific specs of a family member in the electronics industry. 0.6mm diameter with aggressive no-clean flux which makes it flow brilliantly. Those of you who are electronics enthusiasts will love this stuff! 1 x food grade silicone group head seal 1 x food grade silicone grease for installing the O-rings This listing is for the seals only. Any parts shown are only for reference.Check out our store for an extra 10% off when you purchase 3 items or more! **A quick disclaimer**I love free things, we all do, and that’s why I offer free postage on some of my listings. I make it a habit to send your orders through the post office directly, rather than dropping it into a Post Box where they can sometimes get stuck in the mail bag. Please understand however that if you choose the free shipping option, there is no tracking number. If you opt for free postage and your order doesn’t arrive, I can’t be held liable. It’s rare, but it can happen.I take photos of all orders before I ship them out and am happy to send you yours as proof.To avoid this, I recommend using either the standard trackable mail option or even the Express post option if you need your order in a hurry. They might not be free, but they’re trackable.Thanks for your support and understanding,- Maz @ Cockabrew

Frequently Asked Questions About Seal & Triac service kit for Breville Dual Boiler Coffee Machines BES900 BES920 in My Website

www.bioindalamb.com is the best online shopping platform where you can buy Seal & Triac service kit for Breville Dual Boiler Coffee Machines BES900 BES920 from renowned brand(s). www.bioindalamb.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Seal & Triac service kit for Breville Dual Boiler Coffee Machines BES900 BES920 on www.bioindalamb.com?